Network Path & Nearby Access Points
Live ping, download, upload and DNS/traceroute results measured against this site's own server, plotted on a real map of your approximate location — with clearly labeled estimated access points, never claimed as confirmed cell towers.
Desktops have no GPS chip. Your browser estimates position from nearby wi‑fi networks or falls back to your IP address, which is often only accurate to the city — and on some machines it times out entirely. Open this page on your phone for a real GPS fix, usually accurate to a few metres.
Request Route Visualization
ⓘGood Practices
🧭
What traceroute does. It sends packets with a deliberately short
lifespan, so each router along the way is forced to send back an error. Collect those
replies in order and you have the path from this server to the host, plus how long each
hop took. Use it to find where a connection slows down or stops.
Many networks block these probes, so hops showing
* are usually silent routers rather than broken ones.
| Hop | IP Address | Latency | Status |
|---|---|---|---|
| Enter a host above and press Trace to run a real traceroute. | |||
What DNS lookup does. Domain names mean nothing to the network —
it only routes to IP addresses. A lookup asks the domain name system which address a
name currently points at. A records return IPv4, AAAA return
IPv6. Use it to confirm a domain resolves at all, or to check that a DNS change has
propagated.
This resolves from our server, so a result here can differ
from your own machine if your ISP or router caches an older answer.
What this shows. How your browser reached this page and what our server can see about the connection — your public IP, the network that owns it, and the city that IP is registered to. This is exactly what every website you visit can see about you without asking permission.
Real Diagnostics, Honestly Labeled
Ping, download, upload and jitter are measured live against this site's own server. DNS Lookup and Traceroute call a real backend endpoint — DNS uses .NET's resolver, and Traceroute runs the OS's own tracert/traceroute utility with the destination validated first. The map shows your real approximate location once you grant permission, with nearby access points marked as estimates because no ordinary website can identify the specific cell tower a phone or router is using.
What else can you check?
These tools all work on the same connection and address data — pick whichever question you actually have.
NetPath Pro FAQ
Are the nearby access points real cell towers?
No. A standard website cannot identify the specific cell tower or AirFiber unit your device is connected to. The points shown are illustrative estimates placed around your approximate location so you can see how a map-based view would work; they are clearly labeled as estimates.
Is the traceroute real?
Yes. The Traceroute tab calls this server's own backend, which runs the operating system's tracert (Windows) or traceroute (Linux) utility against the host you enter, after validating it is a well-formed domain or IP address.
Why does traceroute sometimes fail?
Some hosting environments block ICMP/UDP probes, or the traceroute utility may not be installed on the server. If that happens the tab will show a clear error instead of fabricated hops.
Where does my location come from?
Only from your browser's own geolocation permission, which you must explicitly grant. If you decline, the map falls back to an approximate IP-based location instead.
Is my data stored?
No. Everything runs live for your session. The exported report is generated and downloaded entirely in your browser.